Tektronix Applications Expert

Hello,

The 2600B user manual covers the entire 1600"B" series including the 2635B.

Here is a link to the manual:
https://www.tek.com/en/sitewide-content/manuals/s/e/r/series-2600b-system-sourcemeter-instrument-user's-manual

Hello ,

The main user manual for basic operations and concepts are presented in this manual at the link below.
https://www.tek.com/en/oscilloscope/dpo70000-mso70000-manual/mso70000dx-dpo70000dx-mso70000c-dpo70000c-dpo7000c-mso5000b-0

P7513A
https://www.tek.com/en/differential-probe-low-voltage-manual/p7508-p7513a-0
AND
https://www.tek.com/en/manual/low-voltage-differential-probe/p7500-series-differential-probe-low-voltage

See this link for more links to manuals and information for the scope.
https://www.tek.com/en/search?keywords=DSA71604C&facets=_templatename%3dManual&sort=desc

Hello,

The USB port might have been disabled. You can check this by selecting Utility and then I/O. Go to the USB Device Port page of the menu and make sure it is turned on. If it is already on, try toggling it off and then back on.

When we have seen issues like this previously when the drive is not in FAT32 format. Please ensure that the drive is formatted with FAT32.

Hello,

Unfortunately this is a known issue with the MSO2kB. If you have access to a DPO2CONN module you can switch to using LAN instead of USB. Otherwise you will need to restart the scope if the USB interface stops responding.

Hello,

In my experience, the USB connection should be kept short on the USB RSAs. This is mostly because the RSAs transfer quite a lot of data at the full 40MHz span (about 230MB/s streaming). The best option here would be to keep the RSA and the computer close together. A repeater would have to be used for certain, but I do not know of anyone who's tried such a setup. I've run short (~6ft.) USB extensions on our RSA before and had good luck, but more than that may introduce some connection reliability concerns at such a high data rate. Most systems similar to yours use a small computer in close proximity to the RSA, and then run the computer's ethernet connection and power down to the ground/base station.

Hello,

The upper bandwidth of this probe is 1MHz, where the probe is -3dB down. The >1MHz is indicating that the probe can at least reach 1MHz.

To use the ADA400A with the MSO2000B, you will need the TPA-BNC adaptor and a TekVPI external power supply (119-8726-01).

6517B is supported in Win10.

Hello

With the purchase of SUP3 BW2T34 you will be provided a license to install on our MDO34 which will increase the bandwidth to 350MHz. For accurate pricing information please reach out to buy@tektronix.com.

Hello,

The most recent update for your MSO58 non-Windows is v1.38.1: https://www.tek.com/en/support/software/firmware/5-series-mso-nonwindows-firmware-v1381

As per the install instructions for v1.38.1, if your MSO58 is currently on a version less than v1.24, you will need to install v1.24.9 first: https://www.tek.com/en/support/software/firmware/5-series-mso-nonwindows-firmware--v1249