Forum User

Hi,

I am using TCP305A to measure the current through a very small value inductor like tens of nH. Want to know the effect of the probe inductance on the effective inductance of the inductor under test.

The oscope is able to display waveforms <10Hz, but in the channel reading on the lower right of the screen, it will only say "<10Hz" when I send a 3 or 5 hz signal to the channel.
The only way I have been able to get the correct frequency reading is by selecting math.
I would like to know how to adjust the settings so that it actually displays the frequency when the frequency is <10hz.
I am also noticing a lag when the amplitude has been adjusted. While the oscope will correctly display the new wave form (for example changing from 2Vpp to 4Vpp) it will not correctly update the voltage value for that channel.

We recently purchased the TPP0500B probe to use with a DPO 7254 oscilloscope. There is a hard, static plastic alignment fin on the side of the probe connector that results in the inability to connect the probe to the oscilloscope. The other fins on the probe connector are mobile and appear to aid in keeping the probe connected. It appears if this was not present, we would not have an issue connecting the probe. I would like to know if there is a model that does not have this fin or another remedy that allows us to use this product.

I am looking to buy a new Keithley DMM6500. I would like to know if any software comes free with the meter. Specifically is any Kick Starter software included in the purchase of a DMM6500? I read on a forum that when the meter is registered on the Tektronix site, this allows some free software to be downloaded. I am buying this for hobby purposes and so i am price conscious.

How do I import a battery model?

What is the simplest approach to load files (CSV, PNG, etc.) from his MSO58 into MATLAB. I can import the files but do not know how to plot them once they're in the software. Do you have any suggestions?

I understand that the single rack mount kit for the Keithley 2290-5 is no longer being manufactured. What is the replacement part for the rack mount kit?

What is the HS 6-digit code for sending the 2636 to Malaysia?

While running the oscilloscope i am trying to waveform however it saving as only .isf format however how to convert them to .csv file ?

I need to generate 2 complementary signals for H- bridge operation. How does this function generator work for this condition?
QQ.17884936