Douglas Koenigsfeld Electronics Technician Ii

Here is the user manual that came with the MCA3040.  Page 38 shows all 3 channels capable of burst measurement.  If the new firmware is what took the capability out, is it possible to have the firmware reloaded with the previous version? I am also attaching 2 pictures, one of the MCA3040 showing the positive pulse width being 4.76nsec, and the second showing the signal generator putting out a pulse of 2usec.  It appears that the MCA is measuring only one cycle of the RF.  Has anyone else had this problem?

This was bought less than 6 months ago.  Nowhere did or does it say that there is no burst measurement function on channel C.  This was one of the main points of buying this model over just a frequency counter.  Working in the radar field, this feature was being looked forward to.  Needless to say, we are not very satisfied with this answer.  

Sorry, you were correct, it is A, B, and C.  When I was seeing A, B, and C, in my mind I saw 1, 2, & 3.  When I go to Measure>Freq> Freg Burst, the only choices I have at the bottom are A and B, channel C does not show up.

V1.32S 26 May 22

No it does not show channel 3, it only shows channels 1 & 2.

I am trying to do a burst measurement on channel 3 of the MCA3040.  There is no option for channel 3 on the display.  The serial number of the MCA3040 is 579887.