Forum User

Is there a calibration fixture available for the CT1?

I recently purchased multiple pieces of equipment with calibration included. Even though the calibration certificate was provided. We need a copy of the calibration data. How do we get the calibration data?

My MSO58 Scope does not pass performance verification. Out of tolerance on Channel 7, 1MOHm Z, 1mV/Div, 2mV/Div, and 5mV/Div. SPC was ran, but did not bring values into tolerance. Is there and adjustment procedure or software if available to resolve this?

I purchased a TBS1052C last year and am interested in getting it calibrated. How do I go about this?

Good morning, we have a DMM6500 requiring re-calibration. Can you please provide me with whatever steps are necessary to get my DMM calibrated?

Hello,
Does the CT-1 current probe require calibration? If so, please advise how to calibrate the probe. Thank you.

Are the P7700 Series TriMode Probes calibratable? If so, will you provide me with the calibration procedure?

Do the TPA-BNC adapters require periodic calibration

I am building a test fixture for a 2657A and I am having issues finding compatible cabling/connectors similar to your HV-CA-554 and HV-CA-571.
What is the coax used for the HV-CA-554 cable and what are the part numbers for the connectors on those cables?

Is there a list of cables that are compatible with the 2290 so that I can connect the unit to a meter?