Ty McKinney

Hello,
See the link below for a list of KickStart supported instruments and more information related to KickStart!
Keithley KickStart Software | Tektronix

keithley/Instrument_Examples/DAQ6510/Mixed_Function_Multi-Channel_Scanning at main · tektronix/keithley · GitHub

Dave,
Visit the link below for examples on multi-channel scanning in VB (third option down) as this may give you an idea. You may want to utilize the scan.monitor.channel TSP command to display a specific channel which you could implement for various channels.

Hello,
See the below datasheets for more information. Unterminated and terminated are provided.

Unterminated: https://www.tek.com/en/datasheet/system-46-r-f-microwave-switch-system-data-sheet
Terminated: https://www.tek.com/en/datasheet/system-46t-rf-microwave-switch-system32-channel-te
 

Hello,
You are doing everything right as far as I can tell from what you are doing. ~3ms is the time it takes for the relays on your physical scan card itself to open/close the relays. That, paired with operating overhead such as firmware and other settings will add additional time to the actual time for a scan. The quickest scan possible with the 7700 card is expected to be around that 10ms mark you are hitting. See the video below for a good walkthrough on how to set up your DAQ6510 for the quickest scan possible, as there may be a few tips and tricks you could add in for your setup.

https://www.youtube.com/watch?v=2d0RFuENBvo

Hello,
See page 7-34 in the reference manual attached below as this should give you a good idea on what you are wanting to accomplish.
Model 2651A High Power System SourceMeter Instrument Reference Manual | Tektronix
Also, I saw you set your source range to 10 but the last value in your lsit is 19. If the lsit does not autorange for you, this may cause some issues as you're attempting to source a value well outside of your set range of 10.

Hello Dave,
Are you operating via front panel or remotely and sending commands? If remote, which command set are you using (TSP or SCPI)?
If using remote communication, you may need to add some display commands to specify what you want displayed on the front panel during data acquisition.

Hello,
Apologies, but we do not have that model generated. If you create a case with our technical support team we can discuss some options, if you are interested.
Here is the link to create a case with us: Contact Tektronix Technical Support | Tektronix

Hello,
Can you create a case with our Technical Support Center? One of our Application Engineers will work with you one on one to help you find a solution. When you create the case, please add the link to this forum post for a reference. 
Thanks!
Contact Tektronix Technical Support | Tektronix

Hello,
We have an available connector you are looking for. Apologies for late response! See attached PNG.
3720-MTC-378 PIN FEMALE TO MALE D-SUB CABLE ASSY, 3M