Fixture Calibration

Hi Alan,<br> <br> Thank you for contacting me.<br> <br> You are looking now for the TMS202 (68020 &amp; 68EC020 Microprocessor Support Package). An acquintance has started:&#160;https://groups.io/g/logicanalyzers. You are invited to join and post. The TMS202 Software is on this site. This site is also a way to establish direct contact (or PM) and yes I am interested in the DAS9200 68020 Disk.<br> <br> Greetings,<br> <br> Calibrationfixture<br> <br> <br> <br> &#160;

Hi again,

Tried to upload a 154 kB PDF with details of the A101.

Hi to All,

Looking for this A101 Termination Board. Tektronix PN (Board) 671-B146-01. There is a Predecessor named A100, but this one only covers P6470 and P6471 PG Probes. Maybe someone has it, will separate from it or can provide additional details?

Calibrationfixture 
 

Hi to All,

Looking for this A101 Termination Board. Tektronix PN (Board) 671-B146-01. There is a Predecessor named A100, but this one only covers P6470 and P6471 PG Probes. Maybe someone has it, will separate from it or can provide additional details?

Calibrationfixture 

 

Hi,

Thank you very much.

 

Hi,

This Software isn't available on www.tek.com (with one exception, see below), but can be found separately on the TLA Application Install Disks. I allready have TLACAL V4.4, V5.1 and V6.0. V6.0 (downloadable from tek) doesn't support the TLACAL2 (P6800 Series) and TLACAL3 (P6900 Series) Fixtures to the same extent as the earlier V5.1 and V4.4. Hoping that TLACAL V5.6, V5.7 or V5.8 support the later introduced P6960DBL, P6962DBL, P6960HS and P6962 Probes.

Is anybody in the possession of these? Would be grateful.

Hi,

Look on:

https://groups.io/g/logicanalyzers

Succes

Hi,

Replace the MB Battery and then change the BIOS Settings (Configuration/Video Configuration) in Enabling Local Flat Panel (LFP) and Save New Settings.

Succes,